What Happens If You Put 410a In A R22 System
What happens if you put 410a in a r22 system. I would think that if he actually did add R22 to your 410 system that it wouldnt have worked right for 3 months then broke down. The polyester oil was mixed with the mineral oil and the best that it could do is an 8 to 12 degree split. What happens if you put R22 in a 410a system.
The old R22 compressors were not so picky. Did it damage the compressor. The system should be okay if it didnt run when you were adding the refrigerant.
We pumped the system down but didnt see much point to clearing the lines. To make a short story long R410A and R22 are refrigerants. What happen when you mix R410a and R134a.
It will just flood back to reduce the compressor life and will greatly reduce the system capacity. Putting R-410A refrigerant into an AC unit that was designed to use R-22 will cause the unit to. R-22 has been phased out and new air conditioners run on the new R-410A refrigerant which is much more environmentally friendly.
Also to know is what happens if you put 410a in a r22 system. What happens if you put 410a in a r22 system. Each system must be vacuumed down to 350 700 microns.
Have more questions about mixing R. For 3 years these r22 systems had been running on 410a. What happens if you mix r22 and r410.
Can r22 be used in a 410a system. It will just flood back to reduce the compressor life and will greatly reduce the system capacity.
As someone else mentioned Id evacuate all the freon run nitrogen through it pull a heckuva good vacuum on it.
If you mean putting 410A into an R-22 system it would fail. A tech could do a poor job of installing the R22 condenser and the unit would last for 10 years or more. It is possible to reuse the copper tubing lineset between the two but we will discuss that later. As someone else mentioned Id evacuate all the freon run nitrogen through it pull a heckuva good vacuum on it. Also R22 and R410 have radically different performance factors plus 410 is a blend to begin with. If you mean putting 410A into an R-22 system it would fail. Somebody is telling me that I can buy the cheaper auto r134a to top off my central r410a system. Have more questions about mixing R. It will just flood back to reduce the compressor life and will greatly reduce the system capacity.
Beside above what Freon is compatible with 410a. Beside above what Freon is compatible with 410a. R-22 has been phased out and new air conditioners run on the new R-410A refrigerant which is much more environmentally friendly. Similarly you may ask what happens if you mix r22 and r410. R410A is a higher pressure system and R22 is a lower pressure system. You cant use an R-410a condenser and an R-22 air handler in the same system when one is using one refrigerant and the other another. Each system must be vacuumed down to 350 700 microns.
Post a Comment for "What Happens If You Put 410a In A R22 System"